Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

New directions in photodetectors: from new solid-state photomultipliers to effective mass inters

Not Accessible

Your library or personal account may give you access

Abstract

Recent advances in superlattice photodetectors are reviewed. In suitably designed superlattice structures hot carriers in the barrier layers can collide with carriers confined or dynamically stored in the wells and Impact ionize them out across the band-edge discontinuity [Fig. 1(a)].1,2This phenomenon can be the basis for a new class of very low-noise avalanche photodiode and solid-state photomultiplier. Photomultiplication measurements in AlInAs/GaInAs, AlSb/GaSb, and InP/GaInAs superlattices provide strong evidence of this effect. In these structures carrier storage in the wells arises from thermal generation processes [Fig. 1(b)]. A large ionization rate ratio has been observed1 (β/α = 20). By appropriately grading the interface of the wells, the storage of electrons can be eliminated, while holes are still confined. This should maximize the ionization rate ratio by minimizing electron initiated multiplication. This structure was grown by MBE in the AlInAs/ GaInAs system and has led to the observation of near-single-carrier-type multiplication (Fig. 2).

© 1987 Optical Society of America

PDF Article
More Like This
Impact Ionization across the band-edge discontinuity in superlattices and its applications to solid-state photomultipliers

Federico Capasso, J. Allam, A. Y. Cho, K. Mohammed, R. J. Malik, A. L. Hutchinson, and D. Sivco
TUB7 OSA Annual Meeting (FIO) 1986

Photon-counting infrared solid-state photomultiplier

Maryn G. Stapelbroek
FA4 OSA Annual Meeting (FIO) 1987

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.