Abstract
For the high data transfer rate of optical disk, the rotational speed is increased over 15,000 rpm and the airflow between the rotating disk and rigid wall has become more and more important for the identification of the dynamic characteristics in case of the slim optical disk drive. Thus this airflow is simulated and considered for the modal analysis of the rotating disk via analytical method and finite element method. In addition, the natural frequency variation of the primary mode and the rigid body mode are observed. The calculated dynamic characteristics of the rotating disk based on the numerical model are available for the prediction of the Non-repeatable runout (NRRO) for the servo controller design.
© 2011 Optical Society of America
PDF ArticleMore Like This
Daiichi Koide, Takeshi Kajiyama, Haruki Tokumaru, Yoshimichi Takano, Yuta Nabata, Tokoku Ogata, Toshimasa Miyazaki, and Kiyoshi Ohishi
OTuA3 Joint International Symposium on Optical Memory and Optical Data Storage (ODS) 2011
Nobuaki Onagi, Yasutomo Aman, Shozo Murata, Junichi Kitabayashi, Kazuhiro Ogawa, Yasunori Sugimoto, and Keisuke Uchida
TuP14 International Symposium on Optical Memory and Optical Data Storage (ODS) 2005
Wonseok Oh, Seungho Lim, Kyung-Su Park, No-Cheol Park, Young-Pil Park, Jae-Sung Lee, and Han-Baek Lee
OMD7 Joint International Symposium on Optical Memory and Optical Data Storage (ODS) 2011