Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Table-top Short Pulse Driver for sub-10 nm soft X-ray lasers

Not Accessible

Your library or personal account may give you access

Abstract

We have developed a high power Ti:Sa laser driver for pumping sub-10 nm table-top soft X-ray lasers. The system is based on a four stage CPA design in which the final amplification stages are pumped by the frequency doubled output of a slab laser system operating at 1053 nm. Output energies of 13.5 J have been obtained pre-compression, allowing gain-saturated lasing in sub-10 laser lines at 1 Hz repetition rate.

© 2011 Optical Society of America

PDF Article
More Like This
Table-top High Energy Short Pulse Driver for sub-10 nm Soft X-ray Lasers

Bradley M. Luther, David Alessi, Yong Wang, Liang Yin, Dale H. Martz, Mark R. Woolston, and Jorge J. Rocca
CTu3C.2 CLEO: Science and Innovations (CLEO:S&I) 2012

Bright High Average Power Table-top Soft X-Ray Lasers

J. J. Rocca, B. Reagan, K. Wernsing, B. M. Luther, A. Curtis, A. Nichols, Y. Wang, D. Alessi, D. Martz, L. Ying, S. Wang, M. Berrill, F. Furch, M. Woolston, D. Patel, M. C. Marconi, and C. S. Menoni
LS3A.2 Latin America Optics and Photonics Conference (LAOP) 2012

Table-top Soft X-Ray Lasers

Jorge J. Rocca
AM1K.1 CLEO: Applications and Technology (CLEO:A&T) 2016

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.