Abstract
Atherosclerosis is a primary cause of critical ischemic diseases like heart infarction or stroke. A method that can provide detailed information about the stability of atherosclerotic plaques is required. We focused on spectroscopic techniques that could evaluate the chemical composition of lipid in plaques. A novel angioscope using multispectral imaging at wavelengths around 1200 nm for quantitative evaluation of atherosclerotic plaques was developed. The angioscope consists of a halogen lamp, an indium gallium arsenide (InGaAs) camera, 3 optical band pass filters transmitting wavelengths of 1150, 1200, and 1300 nm, an image fiber having 0.7 mm outer diameter, and an irradiation fiber which consists of 7 multimode fibers. Atherosclerotic plaque phantoms with 100, 60, 20 vol.% of lipid were prepared and measured by the multispectral angioscope. The acquired datasets were processed by spectral angle mapper (SAM) method. As a result, simulated plaque areas in atherosclerotic plaque phantoms that could not be detected by an angioscopic visible image could be clearly enhanced. In addition, quantitative evaluation of atherosclerotic plaque phantoms based on the lipid volume fractions was performed up to 20 vol.%. These results show the potential of a multispectral angioscope at wavelengths around 1200 nm for quantitative evaluation of the stability of atherosclerotic plaques.
© 2015 SPIE
PDF ArticleMore Like This
Ryo Nagao, Katsunori Ishii, Akiko Kitayabu, and Kunio Awazu
879808 European Conference on Biomedical Optics (ECBO) 2013
K. Ishii, R. Nagao, A. Kitayabu, and K. Awazu
87980Z European Conference on Biomedical Optics (ECBO) 2013
Thomas Lanvin, Donald B. Conkey, Laurent Descloux, Aurelien Frobert, Jeremy Valentin, Jean-Jacques Goy, Stéphane Cook, Marie-Noelle Giraud, and Demetri Psaltis
95420Z European Conference on Biomedical Optics (ECBO) 2015