Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference
  • (Optica Publishing Group, 2015),
  • paper CL_5_1

All-Fiber Burst Mode Femtosecond Laser System Integrated with OCT for Cataract Surgery

Not Accessible

Your library or personal account may give you access

Abstract

Cataract condition is responsible for two thirds of preventable visual impairments afflicting nearly 190 million all over the world [1]. Every year, 19 million cataract surgeries are performed worldwide [2]. Femtosecond laser-assisted cataract surgery has entered clinical use in recent years as an efficient and safe alternative to the traditional method. However, this laser-assisted surgery is in its infancy period and would benefit from lower pulse energies (to minimize collateral effects), shorter operation durations, and more compact laser systems. Fiber lasers can address these requirements with their robustness, compact size and minimal-alignment requiring structure. Further, burst mode operation [3], where high repetition rate pulses are delivered in packets repeated at a relatively low rate, have been shown to produce efficient ablation with minimal collateral thermal effects [4]. Here, we demonstrate the first fiber based burst-mode femtosecond laser device for cataract surgery. The laser is coupled to an optical coherence tomography (OCT) system with computerized controls (Fig. 1(a)). A home built all fiber Yb laser amplifier is seeded by a 109-MHz fiber oscillator, followed by a double-clad preamplifier, acusto optic modulator (AOM) pulse picker and a double-clad power amplifier. An FPGA based electronic system triggered by the oscillator is used to impose the desired pulse train on the laser beam. The system is able to produce pulses in the 5-10 µJ range compressible to sub-500 fs. The imaging and tissue processing functions are executed with OCT monitoring, using its galvo scanner and a common beam path. Maximum imaging depth is 1.6 mm with 8 µm axial resolution. The galvo scanner can reach a scan speed of 1 m/s with any desired scanning pattern. In our preliminary experiments, bursts comprising of 8 pulses with 3 µJ per pulse at 50 kHz burst repetition rate were applied to agar jells (Fig. 1 (b)), which have optical response similar to that of the cornea, as well as cornea obtained from cow eyes. Smooth cuts on ex vivo cow cornea by raster scan pattern with 70% overlapping spots (Fig 1. (c)) and on agar jells with non-overlapping spots pattern (Fig 1. (d)) were obtained. Agar and ex vivo cow eye trials show that we can create incisions with different patterns below the surface, in addition to dotted patterns for corneal incision and smooth lines for capsulorhexis.

© 2015 IEEE

PDF Article
More Like This
All-Fiber Burst Mode Laser System Integrated With OCT for Cataract Surgery

D. K. Kesim, H. Kalaycıoğlu, C. Kerse, and F. Omer Ilday
26H2_5 Conference on Lasers and Electro-Optics/Pacific Rim (CLEO/PR) 2015

Cataract Surgery with OCT-guided Femtosecond Laser

D. Palanker, G. Schuele, N. J. Friedman, D. Andersen, M.S. Blumenkranz, J. Batlle, R. Feliz, J. Talamo, G. Marcellino, B. Seibel, and W. Culbertson
BTuC4 Bio-Optics: Design and Application (BODA) 2011

Laser Refractive Cataract Surgery with the LenSx® Laser

Michael Karavitis
SMA1 Frontiers in Optics (FiO) 2010

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved