Abstract
Typical XUV pulse intensity required to produce nonlinear processes is of the order of 1012–1014 W/cm2 [1], which can be achieved by increasing the energy of the XUV pulses and/or by decreasing the corresponding spot size in the target region. Additional requirements are the following: (i) use of a setup characterized by a sufficiently long exit arm, while maintaining a compact size, in order to accommodate different experimental devices in the target region; (ii) generation of two XUV pulse replica, with adjustable temporal delay (accuracy of the order of 10 as).
© 2015 IEEE
PDF ArticleMore Like This
L. Poletto, F. Frassetto, F. Calegari, A. Trabattoni, and M. Nisoli
CG_P_1 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2013
Federico J. Furch, Tobias Witting, Mikhail Osolodkov, Felix Schell, Claus P. Schulz, and Marc J. J. Vrakking
HF1B.1 High Intensity Lasers and High Field Phenomena (HILAS) 2020
Giulio Maria Rossi, Roland E. Mainz, Fabian Scheiba, Miguel A. Silva-Toledo, Maximilian Kubullek, Maximilian Kubullek, and Franz X. Kärtner
cg_4_3 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2023