Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • CLEO/Europe and EQEC 2009 Conference Digest
  • (Optica Publishing Group, 2009),
  • paper CH4_5

In Vacuo Measurement of the Sensitivity Limit of Planar Bragg Sensors

Not Accessible

Your library or personal account may give you access

Abstract

We present the direct measurement and modeling of the sensitivity limit of an integrated refractive index sensor for the detection of molecular monolayers. Direct UV writing can be used to fabricate a wide range of integrated optical devices particularly Bragg gratings. These Bragg gratings are inherently sensitive to temperature and strain. By etching a portion of the cladding, the mode within the grating region can be exposed to an analyte (Figure 1.a). The spectral response of the grating provides information about the refractive index of the analyte [1].

© 2009 IEEE

PDF Article
More Like This
A Bragg Grating Sensor for Detection of Monolayers at a Surface

R. M. Parker, J. C. Gates, P. G. R. Smith, and M. C. Grossel
CH_P21 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2009

Optofluidic Bragg Grating Sensor for Monolayer Detection

R. M. Parker, J. C. Gates, P. G. R. Smith, and M. C. Grossel.
JTuD57 Conference on Lasers and Electro-Optics (CLEO:S&I) 2009

Optofluidic Integrated Bragg Grating Chemical Sensor: Utilising a Sodium-selective Receptor Surface to Enhance Detection

R. M. Parker, J. C. Gates, M. C. Grossel, and P. G. R. Smith
CH1_2 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2011

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved