Abstract
High power laser diode bars used in pumping units of solid state or fibre lasers or as a direct source in laser diode systems have in the last years become more and more important for industrial laser applications such as welding, brazing, hardening or marking [1], In most of these applications the laser diode light is collimated into multi mode fibres with a given numerical aperture and core diameter. Consequently, increasing the brightness of the laser diode somce offers the possibility to use fibres with smaller numerical apertures and smaller core diameters, and therefore to increase the brightness of the laser beam emitted by the laser system used for the materials processing step. With Bookham’s new Very High Brightness (VHB) devices described in tins present abstract the next significant increase in brightness by a factor of up to 4 depending on the beam shaping technique lias been achieved.
© 2007 IEEE
PDF ArticleMore Like This
Hangyu Peng, Yun Liu, Li Qin, Yongqiang Ning, and Lijun Wang
Tu10 CIOMP-OSA Summer Session: Lasers and Their Applications (SumSession) 2011
Xin Guofeng, Cheng Can, Qu Ronghui, Fang Zujie, Pi Haoyang, and Chen Gaoting
ThA3_5 Conference on Lasers and Electro-Optics/Pacific Rim (CLEO/PR) 2007
M. Mikulla, M Walther, R Kiefer, J. Jandeleit, W. Brandenburg, P Loosen, R Poprawe, and G Weimann
CThF1 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2000