Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Nanosecond Pulse Amplification in a 6000 μm2 Effective Area Higher-Order Mode Erbium-Doped Fiber Amplifier

Not Accessible

Your library or personal account may give you access

Abstract

Continuous wave and nanosecond pulse amplification in a higher-order-mode, Er-doped-fiber amplifier with 6000 μm2 effective area is demonstrated. Both 1480nm pump and 1560nm signal propagate in the LP0,14 mode.

© 2012 Optical Society of America

PDF Article
More Like This
Nanosecond Pulse Amplification in a Higher-Order Mode Erbium-Doped Fiber Amplifier

J. W. Nicholson, A. M. DeSantolo, S. Ghalmi, J. M. Fini, J. Fleming, E. Monberg, F. DiMarcello, and S. Ramachandran
CPDB5 Conference on Lasers and Electro-Optics (CLEO:S&I) 2010

Higher-Order-Mode Erbium-Doped Fiber Amplifiers

J.W. Nicholson, J.M. Fini, J. Phillips, A. DeSantolo, K Feder, X. Liu, P. Westbrook, E. Monberg, F. DiMarcello, C. Headley, and D.J. DiGiovanni
OM3C.5 Optical Fiber Communication Conference (OFC) 2012

Single-frequency pulse amplification in a higher-order mode fiber amplifier with fundamental-mode output

J.W. Nicholson, J.M. Fini, X. Liu, A.M. DeSantolo, P.S. Westbrook, R.S. Windeler, E. Monberg, F. DiMarcello, C. Headley, and D. J. DiGiovanni
CW3M.3 CLEO: Science and Innovations (CLEO:S&I) 2013

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved