Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Conference on Lasers and Electro-Optics/Pacific Rim 2007
  • (Optica Publishing Group, 2007),
  • paper WP_047

Improved Reflective Signal-to-Noise Ratio to Stabilize Laser Frequency using Pound-Drever-Hall Technique with Zerodur Etalon

Not Accessible

Your library or personal account may give you access

Abstract

The reflected light intensity from an extremely low thermal coefficient of zerodur etalon was utilized to stabilize laser frequency using Pound-Drever-Hall approach. The reflective signal-to-noise ratio of etalon is affected by coated mirror reflectivity and insertion loss. Over 6 dB signal-to-noise ratio and more than 100 etalon finesse were demonstrated.

© 2007 IEEE

PDF Article
More Like This
Modelocked semiconductor laser comb stabilization using the Pound-Drever-Hall scheme

T. Yilmaz, C. M. DePriest, A. Braun, J. H. Abeles, and P. J. Delfyett
CThM15 Conference on Lasers and Electro-Optics (CLEO:S&I) 2003

Laser Frequency Stabilization Using Pound-Drever-Hall Technique with an Integrated TiO2 Athermal Resonator

Emir Salih Magden, Michael Y. Peng, Jonathan D. B. Bradley, Gerald Leake, Douglas D. Coolbaugh, Leslie A. Kolodziejski, Franz X. Kärtner, and Michael R. Watts
STu1H.3 CLEO: Science and Innovations (CLEO:S&I) 2016

Laser Linewidth Reduction at 1550nm Using the Pound-Drever-Hall Technique

Evan Lally, Bo Dong, and Anbo Wang
LTuF5 Laser Science (LS) 2008

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved