Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Conference on Lasers and Electro-Optics
  • OSA Technical Digest (Optica Publishing Group, 1995),
  • paper CWF4

Optical measurements using surface-emitting-laser cavities

Not Accessible

Your library or personal account may give you access

Abstract

The cavity design of a surface-emitting laser (SEL) is crucial to device performance. In addition several properties of the laser and its constituent materials can be determined by probing the passive cavity itself. Specifically, the longitudinal mode behavior of passive SEL cavities can be used to measure the thermal dependence of the refractive index and the free-carrier absorption of the cavity materials.

© 1995 Optical Society of America

PDF Article
More Like This
Analysis of temperature measurements on vertical-cavity surface-emitting lasers

J. Piprek, S. J. B. Yoo, R. Bhat, C. Caneau, and M. A. Koza
CWF2 Conference on Lasers and Electro-Optics (CLEO:S&I) 1995

Optically pumped blue-green vertical-cavity surface-emitting laser

H. Jeon, V. Kozlov, P. Kelkar, A. V. Nurmikko, D. C. Grillo, J. Han, M. Ringle, and R. L. Gunshor
CMH2 Conference on Lasers and Electro-Optics (CLEO:S&I) 1995

Use of a vertical-cavity surface-emitting laser as a logic gate

F. Prati, G. Tissoni, M. Travagnin, and L. A. Lugiato
QThA2 Quantum Electronics and Laser Science Conference (CLEO:FS) 1995

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved