Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
Conferences > ASSL > 1996 > QM > QM1

High-power, high-repetition-rate optical parametric oscillator based on periodically-poled LiNbO3

Walter R. Bosenberg, Alexander Drobshoff, and Lawrence E. Myers

Not Accessible

Your library or personal account may give you access

Abstract

We report a high-power, high repetition rate, pulsed optical parametric oscillator (OPO) based on the nonlinear optical material periodically-poled lithium niobate (PPLN). The OPO had maximum outputs of 2 W and 0.6 W at signal (1.54 μm) and idler (3.45 μm) wavelengths, respectively. The pulse repetition rate was varied over 5-32 kHz, and the device was tuned over 2.8 - 4.8 μm (idler) and 1.72-1.37 μm (signal).

© 1996 Optical Society of America

PDF Article
More Like This
Synchronous Pumping of a Periodically Poled LiNbO3 Optical Parametric Oscillator

T. P. Grayson, L. E. Myers, M. D. Nelson, and Vince Dominic
QM5 Advanced Solid State Lasers (ASSL) 1996

1.047 μm synchronously pumped optical parametric oscillator in bulk periodically poled LiNbO3

V. Pruned, S.D. Butterworth, and D.C. Hanna
QM6 Advanced Solid State Lasers (ASSL) 1996

CW Singly-resonant Optical Parametric Oscillators Based on 1.064-μm-pumped Periodically Poled LiNbO3

Lawrence E. Myers, Walter R. Bosenberg, Jason I. Alexander, Mark A. Arbore, Martin M. Fejer, and Robert L. Byer
QM2 Advanced Solid State Lasers (ASSL) 1996

View More...
Select as filters
Select Topics Cancel
Top
       
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.
Privacy | Terms of Use