Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
Conferences > ACP > 2010 > OSPIII > 79880B

All-optical 1×2 switch using Fabry-Perot laser diodes

M. Rakib-Uddin, Tran Q. Hoai, Bikash Nakarmi, and Yong Hyub Won

Not Accessible

Your library or personal account may give you access

Abstract

In this paper, an all-optical 1×2 switch is demonstrated based on gain modulation of injection locked Fabry-Perot laser diode (FP-LD). The control circuit generates set and reset states, which are used to perform 1×2 switch function. The switch output state is maintained once it starts to operate, whether the control signal is present or absent. In the experiment, with extinction ratio of 13.2 dB the switch output eye diagram is recorded.

© 2010 Optical Society of America

PDF Article
More Like This
All-optical ON-OFF switch using a single-mode Fabry-Perot laser diode

M. Rakib-Uddin, Bikash Nakarmi, Tran Q. Hoai, and Yong Hyub Won
79881O Asia Communications and Photonics Conference and Exhibition (ACP) 2010

Optical S-R latch demonstration using injection-locked single-mode FP-LD

M. Rakib-Uddin, Tran Q. Hoai, Bikash Nakarmi, and Yong Hyub Won
79860A Asia Communications and Photonics Conference and Exhibition (ACP) 2010

Realization of All-optical Bit-equality Checking Function Using Fabry-Perot Lasers

Bikash Nakarmi, M. Rakib-Uddin, and Yong Hyub Won
C457 Conference on Lasers and Electro-Optics/Pacific Rim (CLEO/PR) 2011

View More...
Select as filters
Select Topics Cancel
Top
       
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.
Privacy | Terms of Use